Touch pad control panel for a
simplified regulation of your cellar

1 Temperature Control Panel 3 Temperature Control Panel Multi Temp Control Panel

Thanks to very sensible tactile keys, you enjoy an easier regulation process. The setting up of the temperature is accurate to within 1 degree and is adjustable for each zone. This control panel and its LED display also provide visual alarms icons for temperature level (too high or too low), temperature sensor defect and hygrometry to reduce electricity consumption.

1 Temperature Model : Loft Vintage, Manoir, Ermitage

           
Lighting Mode Open Door Alarm Temperature Zone Sensor Fault Alarm Temperature Alarm Confirmation and Setting Access Key
Setting and Selection Keys Lighting Mode Confirmation and Access Key Standby Key Humidity Level Alarm Hot Circuit in-use Indicator Cold Circuit in-use Indicator
         
Temperature Display          
           

Transforming your wine maturing cabinet into a wine serving cabinet: you can use your 1-temperature cabinet as a wine serving cabinet to bring your white or red wines to the correct serving temperature:

  • For white wine: recommended setting range: 6° - 10 °C /43 - 50°F.
  • For red wine: recommended setting range: 15° - 18 °C /59 - 64°F.

This cabinet can therefore be used as a red or white wine serving cabinet

3 Temperatures Model: Castel

           
Lighting Mode Open Door Alarm Maturing Compartment Temp zone (Main Compartment of the Cabinet) Sensor Fault Alarm Temperature Alarm Red Serving Temp Compartment Zone (Upper Compartment of the Cabinet)
Confirmation and Setting Access Key Setting and Selection Keys Lighting Mode Confirmation and Access Key Standby Key Red Serving Compartment Temp display Hot Circuit in-use Indicator
       
Cold Circuit in-use Indicator Maturing Compartment Temp Display        
           

In 3-temperature models, the chilling compartment temperature is determined by the temperature set in the maturing compartment. Therefore, if you want to obtain a temperature lower than 8°C / 46°F in the chilling compartment, it will be necessary to set a temperature lower than 12°C / 54°F in the maturing zone. For the red serving temperature zone, it is impossible to obtain a temperature below 17°C / 63°F for models fitted with glass doors.

  • Maturing compartment recommended temperature setting range: 10 - 14 °C / 50 to 57 °F.
  • Red serving temperature compartment recommended temperature setting range: 16 - 20 °C / 61 to 68 °F.

The chilling compartment temperature is determined by the temperature set in the maturing compartment.

Multi Temperatures Model: Réserve

           
Lighting Mode Open Door Alarm Temperature Zones Concerned Sensor Fault Alarm Temperature Alarm Temperature Zones Concerned
Confirmation and Setting Access Key Setting and Selection Keys Lighting Mode Access and Confirmation Key Standby Key Display of the Temperature on the Top of the Cabinet Hot Circuit in-use Indicator
       
Cold Circuit in-use Indicator Display of the Temp on the Bottom of the Cabinet        
           

For the lowest temperature, the default setting is 8°C / 46°F. However you can set the temperature between 6 - 12°C / 43 - 54°F. ••For the highest temperature, the default setting is 18 °C / 64°F. ••However you can set the temperature between 15 - 20 °C / 59 - 68°F. N.B: in order to operate correctly, your cabinet must be placed in a room with a temperature of 12 - 35 °C / 54 - 95°F.

  • Recommended temperature setting range for the lowest temperature: 7 - 9 °C / 45°F - 48°F.
  • Recommended temperature setting range for the highest temperature: 17 - 20 °C / 63°F - 68°F.

Elegance Control Panel

  • Temperature display: Displays the current temperature inside your wine cabinet.
  • Adjustment button ( SET 1/ SET 2/probe): sets the desired temperature inside the cabinet.
  • On/off button: switches the wine cabinet on and off.

To adjust the temperature of your cabinet:

  • Press button SET 1 or SET 2, the symbol appears.
  • Press the Probe button to make the previous setting appear.
  • Set the desired temperature using the SET 1 and SET 2 buttons.
  • Confirm your programming by pressing the Probe button.

The recommended control range for maturing your wine is from 42°F to 64°F, the default setting is 54°F.

To operate correctly, your cabinet should be located in a room with a temperature between 32°F and 95°F.

When there has been a significant modification in set temperatures, it can take several hours for your wine cabinet to stabilise and display the desired temperature.

* Photos are indicative only and not contractual.
* Information provided is correct at the time of publications but may vary with the manufacturer's product development and various laws and regulations implemented in different countries. The manufacturer cannot be liable for omission and/or if these amendments are not available on the Transtherm World Wide Web site. Please check with you local distributor for the latest updates
Share this page
CONTACT US
Transtherm Wine Cabinets
Copyright © 2015. All Rights Reserved
Made in France